Pressure cooking oatmeal is convenient and hands-off.  The pressure will squeeze the creaminess right out of the cereal making a cozy and nutritious breakfast.  Here’s my technique for the perfect  bowl of pressure cooked oatmeal.

This is one of those pressure cooker techniques that does not take less time but is still more convenient for other reasons.  While microwaving oatmeal is quick, the gruel-like texture is not that appetizing – unless you want to open the microwave and stir every 30 seconds. Making oatmeal from scratch requires you to stand there and constantly stir the porridge until it’s ready and creamy.  If you’re not careful the oatmeal might burn, splatter or boil over.

Cooking oatmeal in the pressure cooker is totally hands-off – no burning, no boil-overs and no stirring to worry about.

But wait, there’s more!

If you have an electric pressure cooker with a timer or delay function  – you can set everything up the night before so breakfast can pressure cook itself in the morning!

Safely Pressure Cooking Oatmeal

I do not recommend pressure cooking oatmeal directly in the pressure cooker’s base for both safety and convenience reasons.

Article post on: dinhthienbao.com

All pressure cooker manuals advise against pressure cooking oatmeal,  and that’s because cooking oatmeal directly in the base will cause the oatmeal to foam, splatter and clog the pressure release valves, which is a safety concern. Using a bowl cooks the oatmeal more delicately, in that it ensures that pressure builds in the cooker before the oatmeal itself is boiling.  This reduces foam and splatters because pressurized steam will actually be pushing down on the oatmeal preventing it from actively boiling (making bubbles that ultimately generate splatters and foam).

Read more  Mexican Shrimp Soup (Caldo de Camaron)

Another issue is that the amount of oatmeal you can pressure cook directly in the pressure cooker is dictated by your cooker’s minimum liquid requirement- making it impossible to make oatmeal for just 1. And even then, the only liquid you can use for the oatmeal is water because milk will scorch and burn  -you can use whatever, and however much, liquid you with the oatmeal-in-the-bowl method – as long as the contents of the bowl(s) do not go over the 1/2 full mark, of course. ; )

Basic Pressure Cooker Oatmeal Preparation

1. Prepare the pressure cooker with 2 cups (500ml) water in the base.
2. Add the steamer basket, or rack.
3. Prepare a small heat-proof container, like cereal bowl or mug, with the correct ratio of oatmeal to liquid (see table, below).
4. If your bowl, or steamer basket,  does not have handles make a small aluminum foil sling to easily lower and lift the bowl into the pressure cooker.
5. Do not cover the bowl with foil.  Cook it uncovered.
6. Pressure cook at high pressure according to oatmeal type (see table, below) – the cooking time is the same if you’re pressure cooking one bowl or six mugs.
7. Open the pressure cooker with Natural Pressure Release  which can take anywhere from 7 to 15 minutes – seriously, don’t mess around. Wait for it .

Oatmeal Pressure Cooking Times & Liquid Ratios

Read more  10 Tips for Making Delicious Homemade Soups

NOTE:Oats are a plant product and there will be variances in the age, drying, toasting and processing between brands. These above cooking times and ratios will work for most oatmeal brands. Should you experience unsatisfactory results, follow the ratio as given on the package of your oats, and use the same conventional cooking time at pressure.

Source: dinhthienbao.com

Two Kinds of Steel-Cut Oats

When this guide first launched a number of cooks were getting unsatisfactory results with steel-cut oats.  That’s because I had inadvertently only tested the time for the “quick-cooking” steel-cut oats which have a conventional cooking time of five minutes and not the plain steel-cut oats which usually take 30 minutes.  As you can see from the picture above, the difference between the grains is how finely they were “cut.”  I finally got my hands on both kinds and have updated the cooking times accordingly.

Pressure Cooker Oatmeal Tips

• Replace the liquid to hydrate the oatmeal with: milk, soy milk, rice milk, 50% coconut milk 50% water, fruit juice, bone broth or water.
• Add a small pinch of salt to accentuate the flavor (don’t worry, it won’t taste “salty”).
• Add a drop of butter or oil to encourage the oatmeal to release the fat-soluble vitamins (like Vitamin E)¹ – this is optional.
• If your electric pressure cooker has a delay or timer function, you can set-up the pressure cooker the evening before to start pressure cooking your breakfast before you wake up. Program the cooker to start cooking your oatmeal about 30 minutes before breakfast. Make a test bowl first, to make sure that the ratios and cooking times work for your particular brand of oatmeal.
• Add any sweeteners after pressure cooking – to use less and taste more of them.

Read more  How to Thicken Potato Soup: 3 Methods & Recipe

Pressure Cooker Oatmeal Recipes

Please leave comment to share your favorite oatmeal recipes and photos!

Via @: dinhthienbao.com

Reference
1. Tremblay, Sylvie, MSc. “What Are the Vitamin Components of Oatmeal?” Healthy Eating. SFGATE. Web. 23 Feb. 2016.

Source: https://www.hippressurecooking.com/pressure-cooker-oatmeal-how-to/

Article post on: dinhthienbao.com